How To Make A Log Cabin Retreat

Hi everybody. This is my first instructable and I hope I do this fine establishment proud. I have acreage of mixed forest with a large quantity of cedar at the south side. I had to take quite a few trees down as they were becoming a problem on the trail. I couldn't bear to waste them as they were straight and solid so I decided to build a little hunters/trappers get away.

I chose a spot near the creek in a field where many deer come. I used pressure treat 4x4s cemented 4 feet deep in the ground as a foundation. I then used 2x10s to build the joists to be covered by the floor. The dimensions are 10 feet by 12 feet. Once covered with 3/4 inch flooring.

This rough sketch explains how to saddle notch the logs.
FRDM5BKHQEA3UEH.MEDIUM It is best to roll the log on top and sketch the diameter of the bottom log onto the one you will cut.

I used a combination of chainsaw, fox tail saw and axe to groove out the saddle. Be patient and you will be rewarded with a tight fitting notch. You continue to build your walls up in this manner. I used 4 inch wood screws every so often to hold the logs in place. My cabin is "backwards engineered" as I had been given some windows and had some which were replacements from my old house. Basically, I made the cabin fit around the windows. The door and frame I build as well as all window frames from 2x6 spruce.
I custom made the roof trusses and made sure they were exact replicas to each other. Once I got to a height of approximately 7 1/2 feet I started putting up the trusses. Once secured, and all the window and door frames were in place, it was time to roof.

Here is a look at the cabin with the roof sheeted and braces now pulled away.

For more information on this project check out this link

Company Instructables
Category , , , , , , ,